Agilent E3647A Dual Output DC Power Supply, 0 to 35 V/0.8 A or 0 to 60 V/0.5 A, 60W

• Reliable Power, Repeatable Results
• Single and dual outputs
• Dual range output
• Front and rear output terminals
• Over-voltage protection
• Remote Sensing
• GPIB and RS-232 standard
• Save and recall functions

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation, please click on the "Request Quote" button below.

The Tektronix PS280 Laboratory DC Power Supplies are multifunction benchtop or portable instruments. The regulated power supplies provide fixed 5 V output for powering logic circuits and two variable outputs for a wide variety of test and experimental uses.

• Two variable outputs, 0 to 30 V, 2A

• Variable Current Limiting

• Selectable independent tracking mode

Additional technical information is available by downloading the .pdf data sheet below. For pricing information, or to receive an official price quotation, please click on the "Request Quote" button below.

Tektronix PS2521G Programmable Power Supply

• Triple Output
• One 0 to 6 V, 0 to 5 A
• Two 0 to 20 V, 0 to 2.5 A
• Digital LED Output Indicator
• SCPI Compatible

The triple output PS2521/PS2521G power supplies are versatile supplies suitable for many applications. The PS2521/2521G has a single supply providing a maximum of 6 V and 5.0 A and two supplies providing a maximum of 20 V and 2.5 A.

The supplies can be operated in one of three modes: independent, series, or parallel. In the independent mode, the output voltage and current of each supply are controlled independently.  In the two tracking modes, the variable outputs are connected either in series or in parallel;  the controls of the master power supply adjust the voltage or current of both power supplies.

The Tektronix PS2521G is GPIB programmable.  The GPIB command sets are SCPI compatible.
Each power supply features 100 memories to store voltage and current limits for instant recall via the front panel or GPIB.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Tektronix PS2521G Programmable Power Supply, please click on the "Request Quote" button below.

Keithley 2303 High-Speed Power Supply, 45 W output        

Features:
• Optimized for battery-powered device testing
• Ultra-fast transient response to load changes
• 5A continuous output
• Pulse peak, average, and baseline current measurements
• 100nA DC current sensitivity
• 45W output (15V @ 3A, 9V @ 5A)
• Sinks up to 2A

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Keithley 2303 High-Speed Power Supply, 45 W output, please click on the "Request Quote" button below.

Agilent E3611A Single Output Power Supply, 30W

The Agilent 30W, single output E3611A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E3611A Single Output Power Supply, 30W, please click on the "Request Quote" button below.

Agilent E3612A Single Output Power Supply, 30W

The Agilent 30W, single output E3612A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E3612A Single Output Power Supply, 30W, please click on the "Request Quote" button below.

Agilent E3614A 48W Power Supply, 8V, 6A

The Agilent 48W, single output E3614A is a reliable and convenient power for benchtop use, and offers solid performance and a variety of basic and enhanced capabilities.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E3614A 48W Power Supply, 8V, 6A, please click on the "Request Quote" button below.

Agilent E3620A Dual Output Power Supply, 50W

The Agilent 50W, dual output E3620A has two clean, reliable outputs for general purpose application; and is compact, affordable for versatile benchtop testing.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E3620A Dual Output Power Supply, 50W, please click on the "Request Quote" button below.

A whole family of low-cost power supplies to meet your needs
The E3600-series of low-cost benchtop power supplies give you the performance of system power supplies without the high price. All E3600 family members give you clean power with dependable regulation and fast transient response. E3600-series single-output models are described on this page. See page 2 for information on dual- and triple-output models.

E3630A triple-output power supply
The 35-watt E3630A triple- output power supply provides three dc outputs: 0 to 6 V with a maximum current of 1 to 2.5A and 0 to 20 V and 0 to -20 V with a maximum current of 0.5A. An autotracking feature lets you use one voltage control to adjust the +20 V and -20 V outputs simultaneously. The outputs track each other to within 1 percent, making it easy to adjust the power supply for circuits requiring balanced voltages.

Affordable programmable power supplies to meet your needs
The E363xA Series of programmable DC power supplies gives you the performance of the system power supplies at a decent price. All models provide clean power, excellent regulation and a fast transient response with built-in GPIB and RS-232 interfaces. The E363xA Series is designed to meet the requirements of the most demanding applications in R&D design verifi cations, production testing, and QA verifi cations with traditional quality and reliability which you can count on.

E3632A/33A/34A single-output dual range power supplies
These single output power supplies give you the fl exibility to select from a dual output range. The output load is protected against overvoltage and overcurrent, which are easily monitored and adjusted from the front panel and remote interface. Remote sensing is available to eliminate the errors caused by voltage drops on the load leads. The E3633A/34A offer front and rear output terminals for easy wiring.

Agilent E3640A Single Output Power Supply, 30W

The Agilent 30W, single output E3640A is a stable and reliable power supply for benchtop and basic automated test applications, and enables versatile solutions for tests that require moderate speed and precision with both GPIB and RS232.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E3640A Single Output Power Supply, 30W, please click on the "Request Quote" button below.

Agilent E3649A Dual Output Programmable Power Supply, 100W

Agilent basic DC power supplies offer essential features for a tight budget. The single & dual output, 30-100 W GPIB E3640 series provide small, compact size for bench and system use; low output ripple and noise; and built-in measurements and basic programmable features with GPIB and RS232 interface. The Agilent 97W, multiple output E3649A is a clean, reliable power supply for general purpose applications, and combine convenient benchtop capabilities with flexible system features in a compact, multi-output package.

Features:
• Single and dual outputs
• Dual range output
• 30 W to 100 W output power
• Front and rear output terminals
• Over-voltage protection
• Remote Sensing
• GPIB and RS-232 standard
• Save and recall functions

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E3649A Dual Output Programmable Power Supply, 100W, please click on the "Request Quote" button below.

Hameg HM7042-5 Triple Power Supply

• 2 x 0-32V/0-2A 1 x 0-5.5V/0-5A 
• High-Performance and inexpensive Laboratory Power Supply 
• Floating, overload and short-circuit proof Outputs 
• Separate Voltage and Current Displays for each Output, 4 Digits at Channel 1+3; 3 Digits at Channel 2 
• Display Resolution: 10mV/1mA at Channel 1+3; 10mV/10mA at Channel 2 
• Protection of sensitive Loads by Current Limit or Electronic Fuse 
• Pushbutton for activating/deactivating all Outputs 
• Low Residual Ripple, high Output Power, very good Regulation 
• Parallel (up to 9A) and Series (up to 69.5V) Operation 
• Temperature-controlled Fan

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for Hameg HM7042-5 Triple Power Supply, please click on the "Request Quote" button below.

Hameg HM8143 Arbitrary Power Supply

• 2 x 0-30 V/0-2 A 1 x 5 V/0-2 A 
• Display Resolution 10 mV/1 mA 
• Parallel (up to 6 A) and Series (up to 65 V) Operation 
• Electronic Load up to 60 W per Channel (max. 2 A) 
• Arbitrary Waveform Power Supply (4096 Points, 12 Bit): Creation of customized Waveforms 
• Software for Remote Control and for Creation of Arbitrary Waveforms 
• Electronic Fuse and Tracking Mode for 30 V Outputs 
• External Modulation of Output Voltages: Input Voltage 0…10 V, Bandwidth 50 kHz 
• SENSE Lines for Compensation of the Voltage drop across the Cables 
• Multimeter Mode for all adjustable Outputs 
• Galvanically isolated USB/RS-232 Interface, optional IEEE-488

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for Hameg HM8143 Arbitrary Power Supply, please click on the "Request Quote" button below.

California Instruments 1251P AC Power Supply, 1250 VA

Features:
• Portable Power, Low Cost
• 1250 VA Output Power
• Simple Front Panel Operation
• 16 Hz to 500 Hz Frequency Range
• High Peak Current Capability
• Remote Control Option

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the California Instruments 1251P AC Power Supply, please click on the "Request Quote" button below.

Affordable programmable power supplies to meet your needs
The E363xA Series of programmable DC power supplies gives you the performance of the system power supplies at a decent price. All models provide clean power, excellent regulation and a fast transient response with built-in GPIB and RS-232 interfaces. The E363xA Series is designed to meet the requirements of the most demanding applications in R&D design verifi cations, production testing, and QA verifi cations with traditional quality and reliability which you can count on.

E3631A triple-output power supply
This famous 80-watt triple output supply offers three independent outputs: 0 to 6 V/5A, 0 to +25V/1A and 0 to –25V/1A. The 6 V output is electrically isolated from the ±25 V supply to minimize any interference between circuits under test. The ±25 V outputs can be set to track each other.

Agilent 6643A 200 Watt System Power Supply, 35V, 6A

Agilent high performance DC power supplies offer speed and accuracy for test optimization. The single output, 200 W, GPIB 6641B-6645B provide fast, low-noise outputs; analog control of output voltage and current; fan-speed control to minimize acoustic noise; as well as parallel and series connections of multiple units. The Agilent 210W, GPIB, single output 6643A is a versatile programmable supply designed to maximize test throughput during design verification or on the production line, and is fully programmable to help reduce test time through a variety of automated capabilities.

Output Ratings
• Output voltage: 0 to 35 V
• Output current (40° C): 0 to 6 A
• Maximum current (50° C/55° C): 5.4 A/5.1 A

Programming Accuracy at 25°C ±5°C
• Voltage 0.06% + 15 mV
• Current 0.15% + 6.7 mA

Ripple & Noise (20 Hz - 20 MHz)
• Voltage rms: 400 µV
• Voltage peak-to-peak: 4 mV
• Current rms: 3 mA

Readback Accuracy at 25°C ±5°C (percent of reading plus fixed)
• Voltage 0.07% + 25 mV
• +Current 0.15% + 5 mA
• -Current 0.35% + 12 mA

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 6643A 200 Watt System Power Supply, 35V, 6A, please click on the "Request Quote" button below.

Agilent 6675A 2000 Watt System Power Supply, 120V, 18A     

Agilent high performance DC power supplies offer speed and accuracy for test optimization. The single output, 2000 W GPIB 6671A-6675A provide fast, low-noise outputs; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.

Output Ratings
• Output voltage: 0 to 120 V
• Output current (40°C): 0 to 18 A
Programming Accuracy at 25°C ±5°C
• Voltage 0.04% + 120 mV
• Current 0.1% + 12 mA
Ripple & Noise from 20 Hz to 20 MHz
• Voltage rms: 1.9 µV
• Peak-to-Peak: 16 mV
• Current rms: 12 mA

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 6675A 2000 Watt System Power Supply, 120V, 18A, please click on the "Request Quote" button below.

Agilent N5770A Power Supply, 150V, 10A, 1500W

Agilent basic DC power supplies offer essential features for a tight budget. The Agilent 1500W, single output N5770A provides universal AC input, GPIB, LAN, USB, LXI Class C compliance, and analog/resistance control of output voltage and current. It delivers solid performance and a variety of basic and enhanced capabilities in a compact 1U package.
Output Ratings:
• Voltage: 150 V
• Current: 10 A
• Power: 1500 W

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the N5770A Power Supply, 150V, 10A, 1500W, please click on the "Request Quote" button below.

Agilent 6612C 40 Watt System Power Supply, 20V, 2A

Agilent high performance DC power supplies offer speed and accuracy for test optimization. The single output, 40-50 W GPIB 6611C-6614C provide small, compact size for bench and system use; fast, low-noise outputs; and dual-range, precision low current measurement. The Agilent 40W, single output 6612C is a versatile low-power solution designed for demanding applications, and is a one-box solution that includes measurement capabilities and built-in GPIB and RS-232 interfaces.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 6612C 40 Watt System Power Supply, 20V, 2A, please click on the "Request Quote" button below.

Agilent N8700 Series System DC Power Supplies

The Agilent Technologies N8700 series system DC power supplies give you just the right performance in a compact (2 U) package. This family of affordable 3300 W and 5000 W single-output programmable DC power supplies consists of 21 models for simple DC power applications.
They provide stable output power, built-in voltage and current measurement, and output voltage and current from 8 V to 600 V and 5.5 A to 400 A.
These economical supplies offer many system-ready features like multiple standard I/O interfaces to simplify and accelerate test-system development for R&D, design validation, and manufacturing engineers in the aerospace/defense, automotive, component and communications industries.

Features:
• 21 Models: 3300 W and 5000 W output power
• Up to 600 V and up to 400 A
• Small, high density 2 U package
• Built-in voltage and current measurement
• Full protection from over-voltage and over-current
• Flexible AC input voltage options
• LAN, USB, and GPIB interfaces standard
• Fully compliant to LXI Class C specification
 
Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent N8700 Series System DC Power Supplies, please click on the "Request Quote" button below.

Agilent E3610A 30W Power Supply

Features:
Output Ratings (Maximum current is derated 1% per °C between 40° to 55°C)
•Range 1: 0 to 8 V, 0 to 3 A
•Range 2: 0 to 15 V, 0 to 2 A
•Power (max): 30 W

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E3610A 30W Power Supply, please click on the "Request Quote" button below.

Agilent E3645A 80W Power Supply, 35V, 2.2A or 60V, 1.3A

Output Ratings (@ 0°C to 40°C)
•Range 1: 0 to 35 V / 2.2 A
•Range 2: 0 to 60 V / 1.3 A

Programming Accuracy (@ 25°C ±5°C), ±(% output + offset)
•Voltage: <0.05% + 10 mV (<0.1% + 25 mV for output 2 of E3646/47/48/49A)
•Current: <0.2% + 10 mA

Ripple & Noise 20 Hz to 20 MHz
•Normal Mode Voltage: <8 mVpp / 1 mVrms
•Normal Mode Current: <4 mArms
•Common Mode Current: <1.5 uArms

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent E3645A 80W Power Supply, 35V, 2.2A or 60V, 1.3A, please click on the "Request Quote" button below.

Agilent U3606A Multimeter/DC Power Supply

When you need both a multimeter and DC power supply, the new Agilent U3606A Multimeter/Power Supply makes a great choice. Agilent´s convenient hybrid combines a 5 ½ digit DMM and 30-W power supply that operates simultaneously and independently, providing you with efficient, affordable testing while saving space on the bench or in a rack.
Measurements include DC and AC voltage and current, 2-wire and 4-wire milliohm resistance, frequency, capacitance, continuity and diode test. Math functions include Null, dBM, dB, Hold and Min/Max/Avg.

Power supply functions include auto scan and ramp for multi-level DC bias testing, and up to 4.8 kHz square-wave output for digital circuit troubleshooting.
The U3606A integrates easily into existing systems with standard USB-TMC 488.2 and GBIP connectivity, and SCPI programmability.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent U3606A Multimeter/DC Power Supply, please click on the "Request Quote" button below.

Agilent 6680A 5000 Watt System Power Supply

Agilent high performance DC power supplies offer speed and accuracy for test optimization. The single output, 5000W, GPIB 6680A-6684A provide low output ripple and noise; selectable compensation for inductive loads; analog control of output voltage and current; and fan-speed control to minimize acoustic noise.

The Agilent 4375W, GPIB, single output 6680A is a reliable supply with easy integration for manufacturing test, and provides stable and reliable DC power enhanced with extensive protection features.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Agilent 6680A 5000 Watt System Power Supply, please click on the "Request Quote" button below.

Agilent 6624A System Power Supply, 40W, 4 outputs

Agilent high performance DC power supplies offer spec and accuracy for test optimization. The multiple output, 40W - 105W GPIB 6621A - 6624A and 6627A provide dual-range outputs; fast, low-noise outputs; built-in measurements and advanced programmable features; and protection features to ensure DUT safety.

The Agilent 40W, four-output 6624A is a versatile solution to help improve system accuracy and reduce test time in a 3U high package.

Features:
Output Ratings (2 outputs each)
• Low-range volts, amps: 0 to 7 V, 0 to 5 A; 0 to 20 V, 0 to 2 A
• High range volts, amps: 0 to 20 V, 0 to 2 A; 0 to 50 V, 0 to 0.8 A
Programming Accuracy at 25°C ±5°C (2 outputs each)
• Voltage: 0.06% + 19 mV; 50 mV
• Current: 0.16% + 50 mA; 20 mA
Ripple & Noise (20 Hz to 20 MHz) 2 outputs each
• Voltage rms: 500 µV
• Peak-to-peak: 3 mV
• Current rms: 1 mA

The HP / Agilent 6632A Power Supply is a 100 Watt, single output, series pass regulated supply rated for up to 20 V @ ±5 A. Both the 6632A voltage and current output can be programmed for either CV or CC operation. A built-in DCM and precision current shunt measure (readback) the actual 6632A output. The internal HP-IB interface allows for complete programmability, including status reporting and interrupt generation with user designated fault conditions.

Tektronix PS2510G Power Supply DC 0-36V 0-3.5A

The single output power supply is especially suited to low-cost computer controlled systems. The maximum voltage is 36V and 3.5A. The Tektronix PS2510G is GPIB programmable. The GPIB command sets are SCPI compatible.

Each power supply features 100 memories to store voltage and current limits for instant recall via frin panel or GPIB

Additional technical information is available by downloading the .pdf data sheet below.

Triple Output
One 0 to 6 V, 0 to 3 A
Two 0 to 36 V, 0 to 1.5 A
Digital LED Output Indicator
SCPI Compatible

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Tektronix PS2520G Programmable Power Supply, please click on the "Request Quote" button below.

Tektronix PS2510G Power Supply DC 0-36V 0-3.5A

The single output power supply is especially suited to low-cost computer controlled systems. The maximum voltage is 36V and 3.5A. The Tektronix PS2510G is GPIB programmable. The GPIB command sets are SCPI compatible. Each power supply features 100 memories to store voltage and current limits for instant recall via frin panel or GPIB.

Additional technical information is available by downloading the .pdf data sheet below. For pricing information, or to receive an official price quotation for the Tektronix PS2510G Programmable Power Supply, please click on the "Request Quote" button below.