Fluke 744 Documenting Process Calibrator   

Whether you’re calibrating instruments, troubleshooting a problem or running routine maintenance, Fluke 740 Series process calibrators can help you get the job done faster. It does so many different tasks, so quickly and so well, it’s the only process calibrator you need to carry.

Features:
• Multifunctional
• Powerful, yet easy to use
• Records and documents results
• Supports popular instrumentation management software
• Truly hand-held
• Rugged and reliable
• Bright white display
• Soft keys
• Three operating modes
• Integrated HART communication capability
• Multi-lingual interface
• AutoStep
• User entered values
• Custom units
• Limit switch calibration procedures
• Differential pressure flow instrument calibration
• Built-in algebraic calculator
• Programmable measurement delay

The Fluke 744 offers all of the capabilities of the 743B, plus the ability to maintain and calibrate selected HART transmitters without a second tool.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 744 Documenting Process Calibrator, please click on the "Request Quote" button below.

Fluke 725 Multifunction Process Calibrator 

725/725Ex/726 Multifunction Process Calibrators
• Two separate channels; measure, source and view process signals simultaneously
• Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
• Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
• Measure or *source pressure using any of 29 Fluke 700Pxx Pressure Modules
• Source mA with simultaneous pressure measurement to conduct valve and I/P tests
• Perform fast linearity tests with auto step and auto ramp features
• Power transmitters during test using 24 V loop supply and simultaneous mA measurement
• Store frequently-used test setups for later use

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 725 Multifunction Process Calibrator, please click on the "Request Quote" button below.

Fluke 726 Precision Multifunction Process Calibrator

725/725Ex/726 Multifunction Process Calibrators
• Two separate channels; measure, source and view process signals simultaneously
• Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
• Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
• Measure or *source pressure using any of 29 Fluke 700Pxx Pressure Modules
• Source mA with simultaneous pressure measurement to conduct valve and I/P tests
• Perform fast linearity tests with auto step and auto ramp features
• Power transmitters during test using 24 V loop supply and simultaneous mA measurement
• Store frequently-used test setups for later use

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 726 Precision Multifunction Process Calibrator, please click on the "Request Quote" button below.

Fluke 741B Documenting Process Calibrator   

Whether you’re calibrating instruments, troubleshooting a problem or running routine maintenance, Fluke 740 Series process calibrators can help you get the job done faster. It does so many different tasks, so quickly and so well, it’s the only process calibrator you need to carry.

Features:
• Multifunctional
• Powerful, yet easy to use
• Records and documents results
• Supports popular instrumentation management software
• Truly hand-held
• Rugged and reliable
• Bright white display
• Soft keys
• Three operating modes
• Integrated HART communication capability
• Multi-lingual interface
• AutoStep
• User entered values
• Custom units
• Limit switch calibration procedures
• Differential pressure flow instrument calibration
• Built-in algebraic calculator
• Programmable measurement delay

The Fluke 741B offers simultaneous source and measure capabilities for all common process parameters. Create and execute automated procedures and automatically capture the results.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 741B Documenting Process Calibrator, please click on the "Request Quote" button below.

Fluke 787 ProcessMeter DMM Loop Calibrator

The Fluke-787 ProcessMeter combines a DMM and a Loop Calibrator in one rugged, handheld tool - for about what you would expect to pay for a loop calibrator alone. The 787 starts with the Fluke-87 DMM you know and trust, then adds ability to measure, source, and simulate DC loop current with 0.05% accuracy and 1 micro-amp resolution. When you carry the ProcessMeter, you're ready for any loop troubleshooting or calibration task. And since it’s dust- and splash-resistant and EMI-shielded, the 787 can survive in your tool belt.

·  DMM and Loop Calibrator in one tool
·  Precision 1000V, 440 mA digital Multimeter Measure AC and DC volts, AC and DC current, resistance, continuity, and frequency 0.1% DC voltage accuracy 0.05% DC current accuracy, 1 uA resolution to 30 mA Simultaneous mA and % of scale readout True RMS AC voltage measurement to 1 kHz Frequency measurement to 20 kHz Min/Max/Average/Hold/Relative modes Diode Test and Continuity Beeper
·  DC current source / loop calibrator 20 mA current source / simulator Simultaneous mA and % of scale readout Manual Step (25%, Coarse, Fine) plus Auto Step and Auto Ramp
·  Clear LCD with backlight; 4,000 counts (30,000 counts for DC current)
·  Externally accessible battery for easy battery changes
·  V overload protection on V, ohms, frequency
·  V overload protection on mA, backed-up by 440 mA 1000V fuse
·  Designed to meet 1000 volt IEC 1010 Cat III standards Measurement

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 787 ProcessMeter DMM Loop Calibrator, please click on the "Request Quote" button below.

Fluke 789 ProcessMeter DMM Loop Calibrator 

Key new features of the Fluke 789
• 24 V Loop power supply
• HART mode setting with loop power (adds 250 ohm resistor)
• 100 % larger dual display
• 1200 ohm drive capability on mA source
• Enhanced backlight with two brightness settings
• 0-100 % mA Span Check buttons to toggle between 4 and 20 mA
• Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 (available Feb. 2003)
• Externally accessible fuses for easy replacement

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 789 ProcessMeter DMM Loop Calibrator, please click on the "Request Quote" button below.

Fluke 712 RTD Process Calibrator  

712 RTD Calibrator features:
• Measure temperature from RTD output
• Simulate RTD output
• Rosemount pulsed RTD transmitter compatible
• Operates with seven types of RTDs
• Measure additional RTDs using Ohms measurement function
• Simulate additional RTDs using Ohms source function
• °F or °C selectable
• Four shrouded banana jacks

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 712 RTD Process Calibrator, please click on the "Request Quote" button below.

Altek TechChek 820 Process Calibrator

Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator.

Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator Altek TechChek 820 Process Calibrator.

Fluke 743B Documenting Process Calibrator

Whether you’re calibrating instruments, troubleshooting a problem or running routine maintenance, Fluke 740 Series process calibrators can help you get the job done faster. It does so many different tasks, so quickly and so well, it’s the only process calibrator you need to carry.

Features:
• Multifunctional
• Powerful, yet easy to use
• Records and documents results
• Supports popular instrumentation management software
• Truly hand-held
• Rugged and reliable
• Bright white display
• Soft keys
• Three operating modes
• Integrated HART communication capability
• Multi-lingual interface
• AutoStep
• User entered values
• Custom units
• Limit switch calibration procedures
• Differential pressure flow instrument calibration
• Built-in algebraic calculator
• Programmable measurement delay

The Fluke 743B offers all the capability of the 741B, plus adds a serial interface for two-way communication with popular PC-based instrumentation management applications.

Additional technical information is available by downloading the .pdf data sheet below.

For pricing information, or to receive an official price quotation for the Fluke 743B Documenting Process Calibrator, please click on the "Request Quote" button below.